FORMING PART
Specification
Description
It is composed of forming part, welding part, cooling part and sizing part.
At first, the forming part has the breakdown, side cluster and fin-pass to consecutively form the strip and the formed strip is melted by H.F. welder at the welding part.
The melted part is pressurized by squeeze roll stand to shape the pipe.
The pipe is cooled down as passing through the cooling zone and it becomes a round pipe or angular pipe at the sizing part.
| Model | Pipe Size(inch) | Tubeout DLA(mm) | Thickness (mm) |
|---|---|---|---|
| MJM-TM010-L | 1 | Ø 8 – 25.4 | 0.7 – 2.0 |
| MJM-TM015-L | 1 1/2 | Ø 12.7 – 38.1 | 0.7 – 2.4 |
| MJM-TM020-L | 2 | Ø 17.3 – 50.8 | 0.8 – 3.2 |
| MJM-TM025-L | 2 | Ø 21.7 – 60.5 | 0.8 – 3.6 |
| MJM-TM030-L | 2 1/2 | Ø 25.4 – 76.3 | 1.0 – 4.5 |
| MJM-TM040-L | 3 | Ø 34 – 89.1 | 1.0 – 4.5 |
| MJM-TM050-L | 4 | Ø 34 – 114.3 | 1.6 – 5.0 |
| MJM-TM060-L | 6 | Ø 60.5 – 168.3 | 2.0 – 6.5 |
| MJM-TM080-L | 8 | Ø 89.1 – 219.1 | 3.2 – 8.0 |
| MJM-TM120-L | 12 | Ø 114.3 – 323.9 | 4.8 – 10.7 |
| MJM-TM160-L | 16 | Ø 168.3 – 406.4 | 4.8 – 16.0 |
| MJM-TM200-L | 20 | Ø 168.3 – 508.0 | 5.6 – 18 |
| MJM-TM240-L | 24 | Ø 219.1 – 610.0 | 6.0 – 20 |
